BrewLab Pro Water Analysis Kit
LaMotte introduces the new BrewLab® Pro water analysis kit. Designed with the professional brewer in mind, this kit measures 11 test factors which are important in the brewing process. Water is the most important ingredient for any brewer. The BrewLab® Pro helps you to make your best craft brew and reproduce your results time and time again!
Test for 11 Essential Factors
- Chloride
- Sulfate
- Alkalinity
- Total Hardness
- Calcium Hardness
- Magnesium Hardness
- Sodium
- pH
- Temperature
- Total Dissolved Solids
- Dissolved Oxygen
Kit developed in cooperation with John Palmer, author of Water, A Comprehensive Guide for Brewers.
Test Factor Test System Range # of Tests
Chloride Direct Reading Titrator 1 drop = 10, 25 ppm Approx. 80
Sulfate Turbidimetric 0-200 ppm sulfate 50
Alkalinity Direct Reading Titrator 0-200 ppm (and higher) 50 at 200 ppm
as CaCO3
Total Hardness Direct Reading Titrator 0-200 ppm (and higher) 50 at 200 ppm
as CaCO3
Calcium Hardness Direct Reading Titrator 0-200 ppm (and higher) 50 at 200 ppm
as CaCO3
Magnesium Hardness Calculation -- --
Sodium Calculation -- --
pH Electrometric 0.0-14.0 pH Unlimited
Temperature Electrometric 32 to 149°F (0 to 65°C) Unlimited
Total Dissolved Solids Electrometric 0 to 99.9 ppm (mg/L), Unlimited
100 to 999 ppm (mg/L),
1.00 to 9.99 ppt
Dissolved Oxygen Electrometric 0 to 200.0% Unlimited
(Sat. Mode)
Dissolved Oxygen Electrometric 0 to 20.00 ppm (mg/L) Unlimited
(Conc. Mode)